MidSouth Crawl Space Solutions Before & After Photos

The edges and surrounding slab around this pool was suffering a bad cracking problem. In some corners, pieces of concrete were trying to break off, leaving behind a dangerous tripping hazard around the water. To remedy this, one of our design specialists, an expert in concrete repair, created a plan involving our PolyLevel and NexusPro systems. The PolyLevel system uses our expanding PolyFoam, perfect for filling in eroded voids under concrete slabs. This will fill in any gaps, strengthen the surrounding area, and re-level what is needed. To help prevent further voids and settlement, the current cracks and joints were sealed with NexusPro. This high quality crack sealant is durable and moisture/weather resistant, perfect for an outdoor area right next to a body of water. This area should be safer than ever!

Our concrete crew was able to make a striking difference in a very important part of this home, the front walkway, the first thing that most people see as they walk up to the door. Not only visually appealing, it was creating a tripping hazard for any visitors who enter and exit the home. Fortunately, we were able to bring the solution to both these problems in the form of our PolyLevel and NexusPro systems. PolyFoam is injected beneath the slab to fill in any voids and act as a new form of support, the perfect amount is injected to raise it back up to original level. To prevent further erosion, our concrete crew filled in the remaining gap with our high-quality crack sealant, NexusPro. The sealant is flexible and made to be resistant against harsh weather and UV-rays. Check out the major change in the before and after images, you may struggle to even tell where this tripping hazard originally was!

After working with these homeowners to help moistureproof the underside of their home, they later called us back out to come take a look at their concrete driveway as well! The joint in the middle of the driveway had begun to widen, and cracks formed over the years throughout the rest of the driveways. Leaving these unattended to results in openings for water to find its way under the the slab, erode soil, and create damaging voids. To avoid these voids and the settlement they bring, we used our high quality sealant, NexusPro, to seal the each crack and the center joint. For any area that had already slightly experienced settlement, we used our PolyLevel System, which involves drilling very small holes to pump PolyFoam into the voids, filling them up and leveling back out the slab. We are happy to have been able to help this homeowner multiple times now!

Michael's crew cleaned and dried out this Ridgeland crawlspace before encapsulating it and installing a waterproofing system to permanently keep water and moisture out. We also treated the mold with our Mold-X2 and the results are awesome! Check out the wood on the far right side.

This 3 foot tall crawlspace was holding moisture and standing water causing hard wood floors to buckle inside the home. The homeowner was googling solutions and found our company. Corey Becker performed the estimate and was able to design a permanent solution to keep their crawl space clean and dry. Mike and his crew installed the encapsulation quickly and efficiently, leaving the home in better shape than we found it!