Concrete Leveling Before & After Photos

This homeowner reached out to us with a driveway problem, it appeared to be teeter-tottering, sinking in one area and trying to raise in another. Being a surface that is walked on and driven on every single day, the homeowner obviously knew something would need to be done. After stumbling upon one of our television commercials, they decided to reach out and give us a chance. We sent one of our design specialist out, a master of all things concrete, and had them take a look at this uneven slab. You'll notice in the first image that the difference in level is very immediately noticeable, but the problem gets worse than that. Under the flat and raised part of the slab, larger voids had began to form, meaning an even worse state of imminent. This is where PolyFoam comes in. Our PolyLevel system, which uses the expanding foam, involves us injecting an exact needed amount of foam to fill any voids and raise concrete back up to original level. It is pumped through tiny created holes in the slab, which are filled up after a very quick cure time. Check out the difference in these two images! Once again, you may not be able to see the voids in the image, but you wouldn't be able to anyways, because our concrete crew managed to completely fill them in. We are very proud of our team and their expert work, enjoy the comparison!

These homeowners could no longer stand the annoying bump they felt every single time they pulled into their garage, it was time to do something about it. They reached out to us and we were able to send out one of our design specialists to find a solution. Erosion had created a void under the slab, resulting in the driveway slowly settling over time. If left alone, this type of problem can result in a lot more than annoying bumps, including cracks and broken concrete. Fortunately, we were able to use PolyFoam to fill in that void and raise the slab back up before things got much worse. Check out the difference in the two provided images!

In Pinola, MS, a homeowner faced a problematic tripping hazard due to concrete settling on their pool patio, as shown in the "before" photo. The uneven surface was a safety concern and an eyesore. Our Midsouth Crawlspace Solutions team used the innovative PolyLevel® system to lift and stabilize the sagging slab, and application of NexusPro® Joint Sealant to secure cracks and joints flawlessly. In the "after" photo, you can see the restored, even patio visually appealing and safe for family gatherings.

Check out these two images that showcase the magic of the PolyLevel system. The homeowners reached out to us concerned about the tripping hazard that had formed on the sidewalk beside their home. It was important that they reached out to us when they did, if left alone, the slab would have continued to settle and eventually begin to crack. By drilling small and noninvasive holes, our concrete team was able to inject some of the expanding PolyFoam under the slab and fill in the holes created by erosion. Using the perfect amount, determined by Matt, our design specialist we originally sent out, we were able to get this sidewalk completely back up to level. You can also see our NexusPro sealant in the joints of the sidewalk. Applying this acts as a barrier against moisture and harsh weather, further protecting the sidewalk. Great job team!