MidSouth Crawl Space Solutions Before & After Photos

After out stabilization process, the cracks on the outside walls of this home sealed up very nicely! How far we can seal cracks will vary from home to home, but we're always happy to see when we can safely make a visual difference.

This crawlspace was set right above our 12" benchmark to install an encapsulation. Anything under 12" is too low for our guys and products to get under. 

This house originally had lattice work wrapped around the perimeter of the crawlspace, leaving it susceptible to outside air. Thankfully, the homeowner had this bricked in, in anticipation of the encapsulation. Once this was done, our guys came out and installed our encapsulation system utilizing the sump pump, dehumidifier, drainage matting, and 20 mil liner. Now this crawlspace will be able to dry out without the influence of humidity and ground water seepage.

Some unsightly wall cracks our talented crews were able to seal up during the process of stabilizing this home in Morgan City, LA!

This once wet and humid crawl space has been transformed by both our encapsulation and smartjack systems. The CleanSpace Liner you see throughout the whole underside of the home is helping tackle the moisture problem. It is much more durable than your average vapor barrier, and is tightly secured to the walls and floors of the space. Also seen in the photo is one of our smart jacks. These act as a permanent support system for the joists/floors that were already affected by the moisture. They can even be adjusted to fit the home's needs as it shift throughout the years. Unseen in the photo is our crawl space dehumidifier and sump pump system, which both also work towards keeping the space dry and healthy. Great job to our design specialists and crew members who planned and installed this job!

This homeowner in Raymond, MS gave us a call because her home was experiencing sagging floors. Melissa performed a very detailed inspection, finding moisture and significant mold issues.

Because the moisture was so bad, they were having heavy mold issues; to the point that they had several beams and joists rotting. They had the woodwork repaired before our guys came to install the encapsulation. Once this was taken care of, our team was able to treat the mold and protect the new and remaining joists from moisture issues in the future by installed a waterproofing system. Mike and his crew completed the job and got a great review.