MidSouth Crawl Space Solutions Before & After Photos

This home was planned to be used as a rental, but that would not be possible as long as the smell from the crawl space persisted. Moisture and mold issues had gotten bad enough that it was noticeable from inside the home, and something on the underside would need to be done. That is where our encapsulation system comes in. By sealing off the crawl space and encapsulating it, we can create a regulated environment that is constantly protecting itself against all forms of moisture. Our CleanSpace Liner blocks out water intrusion, our crawl space dehumidifier regulates humidity, and our sump pump system sends collected water far from the inside. These combined solutions leaves a dry area, one where mold cannot thrive and smells do not have to be worry. We're very glad we could offer our help to the owner and the many residents that can now safely stay inside.

The edges and surrounding slab around this pool was suffering a bad cracking problem. In some corners, pieces of concrete were trying to break off, leaving behind a dangerous tripping hazard around the water. To remedy this, one of our design specialists, an expert in concrete repair, created a plan involving our PolyLevel and NexusPro systems. The PolyLevel system uses our expanding PolyFoam, perfect for filling in eroded voids under concrete slabs. This will fill in any gaps, strengthen the surrounding area, and re-level what is needed. To help prevent further voids and settlement, the current cracks and joints were sealed with NexusPro. This high quality crack sealant is durable and moisture/weather resistant, perfect for an outdoor area right next to a body of water. This area should be safer than ever!

Our concrete crew was able to make a striking difference in a very important part of this home, the front walkway, the first thing that most people see as they walk up to the door. Not only visually appealing, it was creating a tripping hazard for any visitors who enter and exit the home. Fortunately, we were able to bring the solution to both these problems in the form of our PolyLevel and NexusPro systems. PolyFoam is injected beneath the slab to fill in any voids and act as a new form of support, the perfect amount is injected to raise it back up to original level. To prevent further erosion, our concrete crew filled in the remaining gap with our high-quality crack sealant, NexusPro. The sealant is flexible and made to be resistant against harsh weather and UV-rays. Check out the major change in the before and after images, you may struggle to even tell where this tripping hazard originally was!

Michael's crew cleaned and dried out this Ridgeland crawlspace before encapsulating it and installing a waterproofing system to permanently keep water and moisture out. We also treated the mold with our Mold-X2 and the results are awesome! Check out the wood on the far right side.

This 3 foot tall crawlspace was holding moisture and standing water causing hard wood floors to buckle inside the home. The homeowner was googling solutions and found our company. Corey Becker performed the estimate and was able to design a permanent solution to keep their crawl space clean and dry. Mike and his crew installed the encapsulation quickly and efficiently, leaving the home in better shape than we found it!